Whether you’ve added a high-clearance bumper, a swing-out tire carrier, or a slide-in camper, losing your factory backup camera is a major safety setback. The GG Offroad Tailgate Camera Relocation Cable is the definitive fix for the 4th Gen Toyota Tacoma (2024+).
This 10ft extension cable allows you to remove the OEM camera module from your tailgate handle and mount it anywhere on your aftermarket setup. It is a plug-and-play solution that maintains your factory camera feed without the need for splicing or permanent vehicle modification.
Key Benefits
Solve Visibility Issues: Perfect for when your tailgate camera is blocked by oversized gear or off-road armor.
Long-Reach Design: The 10ft length provides enough slack to route the cable through swing-arms or to the top of a camper shell.
Simple Installation: Unplug the factory harness near the spare tire and bridge the gap with our custom-fit cable.
OEM Integration: Designed specifically for the 2024+ Tacoma CANBUS system to ensure no "Camera Unavailable" errors.
Common Accessories That Block Your Camera
If you are running any of the following 4th Gen Tacoma mods, your swing-out is likely blocking your rearview or your tailgate camera has been removed entirely:
Swing-Out Tire Carriers: (e.g., CBI Offroad, Expedition One, Westcott Designs)
Slide-in or Pop-up Campers: (e.g., Go Fast Campers (GFC), Lone Peak, Four Wheel Campers)
Rear Bumper Storage Boxes: Large gear boxes that sit directly in the line of sight of the tailgate handle.
Oversized Spare Tires: 35" or 37" tires mounted on high-clearance rear bumpers.
Tailgate-Mounted Bike Racks: Vertical racks (like VelociRAX) that obscure the lens.
Technical Specifications
Fitment: 2024, 2025, and 2026+ Toyota Tacoma (All Trims)
Length: 10 Feet
Connection: Weather-sealed OEM-style connectors
Note: Some trim levels may require a 30-second modification to a plastic "key" on the camera housing for a perfect fit.
Extremely easy install: Remove the camera module from the handle of your tailgate and plug this cable in right beside the spare tire under the truck bed. Video coming soon!
Installation instructions
Install Video
Whether you’ve added a high-clearance bumper, a swing-out tire carrier, or a slide-in camper, losing your factory backup camera is a major safety setback. The GG Offroad Tailgate Camera Relocation Cable is the definitive fix for the 4th Gen Toyota Tacoma (2024+).
This 10ft extension cable allows you to remove the OEM camera module from your tailgate handle and mount it anywhere on your aftermarket setup. It is a plug-and-play solution that maintains your factory camera feed without the need for splicing or permanent vehicle modification.
Key Benefits
Solve Visibility Issues: Perfect for when your tailgate camera is blocked by oversized gear or off-road armor.
Long-Reach Design: The 10ft length provides enough slack to route the cable through swing-arms or to the top of a camper shell.
Simple Installation: Unplug the factory harness near the spare tire and bridge the gap with our custom-fit cable.
OEM Integration: Designed specifically for the 2024+ Tacoma CANBUS system to ensure no "Camera Unavailable" errors.
Common Accessories That Block Your Camera
If you are running any of the following 4th Gen Tacoma mods, your swing-out is likely blocking your rearview or your tailgate camera has been removed entirely:
Swing-Out Tire Carriers: (e.g., CBI Offroad, Expedition One, Westcott Designs)
Slide-in or Pop-up Campers: (e.g., Go Fast Campers (GFC), Lone Peak, Four Wheel Campers)
Rear Bumper Storage Boxes: Large gear boxes that sit directly in the line of sight of the tailgate handle.
Oversized Spare Tires: 35" or 37" tires mounted on high-clearance rear bumpers.
Tailgate-Mounted Bike Racks: Vertical racks (like VelociRAX) that obscure the lens.
Technical Specifications
Fitment: 2024, 2025, and 2026+ Toyota Tacoma (All Trims)
Length: 10 Feet
Connection: Weather-sealed OEM-style connectors
Note: Some trim levels may require a 30-second modification to a plastic "key" on the camera housing for a perfect fit.
Extremely easy install: Remove the camera module from the handle of your tailgate and plug this cable in right beside the spare tire under the truck bed. Video coming soon!
Installation instructions
Install Video
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
